OUR SERVICES INCLUDE:

Automated warranty tracking software – repair history

Check handpiece for any visual shell damage that may be causing a problem

Test Chuck bur holding strength

Function testing – check for vibration / chatter / heat / water spray / leaks - water or air

Disassemble the handpiece

Check Spindle concentricity (straightness) for tolerances within ISO standards of 0.0011” OR 0.03 mm

• If the turbine spindle passes Concentricity Testing, Chuck Strength Test and the impeller is not damaged we rebuild it to O.E.M. standards
• If the turbine spindle Concentricity or Chuck Holding Strength is not within tolerances we install a new turbine.

 Sub-assembly cleaning – spindle / impeller / chuck

Bearing change out – German made bearings equal to or exceeding O.E.M specifications

Inside and outside cleaning – ultrasonic where applicable

 Replace O-rings or applicable seals

 Clear waterway(s) using hot water, alcohol, high pressure

 Reassemble the Handpiece

 Function test – torque – RPM – sound – water spray atomization